IBM Z Hardware and Operating Systems Ideas Portal


This is the public portal for all IBM Z Hardware and Operating System related offerings. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

BCP_IOS

Showing 51

Health check the completeness of volumes in a zOS HyperSwap configuration managed by CSM

The HyperSwap configuration should be checked that no PPRC enabled volume that should be in the configuration is missing, otherwise the integrity of data is not given in case a Swap occurs. It should be possible to define a list with exceptions of...
almost 4 years ago in z/OS / BCP_IOS 0 Future consideration

z/os message after model conversion takes place using OOCoD or CBU

Needing z/os to report a message when a model conversion takes place with OOCoD or CBU. z/os should report this with out the use of another product.There is an IBM case number associated with this. The case number is TS002615373.
over 4 years ago in z/OS / BCP_IOS 2 Future consideration

IMPROVED METHOD TO REMOVE PATHS

We did the test to verify the effect of RECOVERY PATH_SCOPE=CU. The test case of one path busy got the expected result. 2-3 seconds after 'VARY ONLINE', the path of all devices under the same CU got offline. However, the two paths busy case did no...
almost 5 years ago in z/OS / BCP_IOS 1 Future consideration

Information about device status for channel path on message IEE174I

The form 17 of message IEE174I in response to the command DISPLAY M=CHP(chpid) shows the channel path status to the device despite the title shown on display being “DEVICE STATUS FOR CHANNEL PATH chpid” The information showing z/OS device status f...
almost 5 years ago in z/OS / BCP_IOS 1 Future consideration

VOLSER in an AUTOIPL Policy

We would like the AUTOIPL Policy (contained in a DIAGnn member) to accept a VOLSER for MVS (for both LOAD Address and LOADPARM) and SADMP specifications. Upon interpreting the DIAGnn member, I would expect the code to issue a UCBSCAN (or whatever ...
about 5 years ago in z/OS / BCP_IOS 0 Future consideration

Concatenating AUTOIPL members

We would like to be able to have DIAGnn members, that only contain MVS (in the AutoIPL policy). We'd like to have the ability to change the MVS address, but leave the existing SADMP information intact. For example DIAGAA contains: AUTOIPL SADMP(7D...
about 5 years ago in z/OS / BCP_IOS 0 Future consideration

Enhanced SETIOS Function to Perform Freeze

Hyperswap verifications with the new SETIOS-function work very well. But this works for Unplanned Hyperswaps only, not for a Freeze.It would be very helpful when a similar command is available for the verification on the Secondary DASD (e.g. "SETI...
about 5 years ago in z/OS / BCP_IOS 18 Planned for future release

AUTOIPL CHANGE for LPAR ACTIVATION

WE would like to have AUTOIPL processing incorporate a deactivate on activate of the lpar that is being REIPL. This should be and option in the DIAGXX member, like you now have for reconfigurable storage.This process is now been done by our BMCsof...
over 5 years ago in z/OS / BCP_IOS 2 Planned for future release

Display machine bundle level with a z/OS operator command

Currently, there is no z/OS operator command to display the MCL bundle level for a z machine.Enhance D M=CPU (or some other MVS command - D IPLINFO or D XCF) to provide this information.
almost 6 years ago in z/OS / BCP_IOS 0 Future consideration

Allow volumes/devices to be marked online during LOADxx processing.

This may not be the correct component. Customer is requesting a process, possibly in the LOADxx member, that allows them to manipulate the status of I/O devices defined in the IODF dynamically at IPL time prior to their being needed. If the IODF m...
about 6 years ago in z/OS / BCP_IOS 0 Future consideration

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.